What can be made of old leather boots?

Every woman has things that are worn "to the holes." That is, we are so in love with this thing that we do not want to set it aside. Most often it concerns leather boots. Of course, on the one hand, the socks were already worn out, the appearance of a solid “C grade”, but on the other hand, the shafts look like a new thing. Then the question arises: what can be done from old leather boots? Today we will deal with this topic and find the best solution.

to contents ↑

Making a clutch of old boots

One of the most common options for what can be made from old boots is to make a clutch, which will cost you very cheaply.

A few attempts - and you will design a trendy clutch!

We create:

• At the initial stage, you need to correctly reveal the future clutch. The main rectangle should be 37 cm in width and 21 cm in height.
• On each side it is necessary that there is an allowance with which you could later fold and sew. The allowance is somewhere around 10 to 15 cm on each side.
• All sizes are quite approximate, since the size of the shaft may be different. The size of your future clutch also depends on this.
• Using sharp scissors or a clerical knife, it is necessary to trim the bootleg.

Important! We draw your attention to the fact that you do not need to sew in a zipper, since you have it. It will be located at the top of the clutch.

• After you cut the workpiece, you simply fold, as suggested. Then with the help of special glue and a sewing machine, you design yourself a unique clutch for a short period of time.

Important! If on the outside you have small flaws, you can stick rhinestones, beads, a brooch from various materials on them. In this matter, your imagination is where to turn around. An excellent solution is to glue felt flowers onto a leather blank. A large number of Western actresses come with similar clutches.

to contents ↑

We make warm insoles for children's shoes

When deciding what to do from old boots with your own hands, you can make not only products for your own use, but also take care of your children and the manufacturer of warm quality insoles for winter shoes. In this case, you will be sure that the baby’s legs will not get wet, they will always be warm and dry.

Instructions for making insoles for shoes from old boots:

• At the first stage, you need to cut off the bootleg. Use sharp scissors to complete this operation. The lower part of the shoe is immediately thrown into the trash. She will no longer be useful to us.
• Now we take out our insole from the shoes, apply it to our leather blanks.
• Next, with the help of soap, chalk, pencil or marker, we circle the insole and cut new shoe products from the blank.

Important! We draw your attention to the fact that it is necessary to cut not only the fur part, but also the leather.

• After the previous operation, you will get two leather insoles and two fur insoles.
• Now, using the “Moment” glue, it is necessary to connect these two insoles with each other.
• After they have dried, it is worth sticking them inside the shoes. This should be done so that the fur is on top.

Important! In this way, we decided what can be made from old boots - we insulated winter shoes, while saving a lot of money.If your bootleg is large, then you can make insoles not only for a small leg, but also for an adult. Try, experiment and you will succeed!

to contents ↑

Making a bag of old boots

The most common solution is to sew bags from old boots with your own hands. Now we will tell you about how to make an accessory for a fashionista of high quality, beautiful and individual.

Important! The main rule in the manufacture of bags from boots with their own hands is the use of high-quality materials. That is, you can take not one pair of old shoes, but two. They can be in contrasting colors. From this, the new product will be even more beautiful.

We act:

• For manufacturing you will need two blanks measuring 26 cm by 26 cm. These will be the future walls of the bag.
• There are also three parts that will serve as the side parts and the bottom and their dimensions are 10 cm by 26 cm.

Important! In the manufacture of such an accessory, you can not use the part intended for the bottom, then you will have an accessory without a bottom. In this case, below you just need to flash a seam and connect the parts.

• After you have cut out all the details, you need to lay out the details on the table and think over all the nuances of the future product. If your shades do not match, lay out and think about how you will stitch them. In contrasting accessories, a chess solution is an excellent solution.

Important! It is recommended before stitching the parts finally that all parts are glued together. So it will be easier for you to make a bag of old boots with your own hands.

to contents ↑

Stock footage

As you can see, there are several options for what can be made from old leather boots. In any case, you should not throw out a leather product, because any quality thing can give a second life!