What can be done from the remnants of the floor?

If after repair you still have a parquet board, then this article is for you. Today we will tell you what can be done from the remnants of parquet for the home and garden. Unfortunately, no matter how you calculate the exact number of parquet boards for rooms, there will still be surpluses. Do not rush to throw them away, but hide them in a secluded place, because, even if everything was done efficiently, over time one of the parquet parts may crack or deteriorate under the influence of a caustic substance, here a couple of dies stored for a “rainy day” will come in handy. And we, in turn, offer you several ideas that will help to use free boards for creative home design.

to contents ↑

DIY parquet furniture - ideas

A good way to use parquet is to make furniture yourself. For this you need a minimum of tools and materials.

Here are just a few ideas that can be made from the remnants of the floor:

• Sheathe old cabinet furniture with a laminate - give her a new life.
• Narrow cabinets for small things are very easy to assemble from the floor. Oak has excellent resistance to changes in temperature and humidity, so you can use lockers on the balcony and loggia. Below we will tell you how to make such furniture.
• Trays for armchairs and sofas. The tray can be placed on the wide armrests of the sofa and chairs in order to put a cup of coffee, a glass of juice, a book, fold the remotes and mobile phones. You can use the tray for the bath. And it is not necessary that the board was made of oak, as it can always be painted to match the color of the furniture, and then coated with parquet lacquer.
• Shop in the shower.
• Boxes for seedlings. This is the simplest application of laminate residues. The only advice: on the inside, protect the boards with oilcloth, as the laminate does not withstand prolonged exposure to moisture.
• Lampshade.

Important! It is not so important what you decided to make from the remnants of the floor, take note of such useful tips:

• To fasten the boards, use water-resistant and suitable wood adhesive. Use a good grade polyurethane compound for this purpose.
• After gluing the parts, additionally coat the seams.
• After drying, sand wooden boards and coat with waterproof varnish.

to contents ↑

How to make a cabinet from parquet?

For the manufacture of furniture you will need:

• About 8 squares of parquet board. The dies of the cabinet itself are laid out in dice.
• Polished beam (several meters) for the frame. Crossbars and racks are made from it.
• Wooden lining for shelves.
• Plywood or 5 mm fiberboard for doors.
• Plastic molding for the frame.

Important! Furniture can be made across the entire width of the balcony. The height of the cabinet can be 1 m or more, it all depends on the amount of material and your wishes.

The procedure for making a cabinet from the remnants of parquet is as follows:

1. Make a furniture frame from a bar. For each shelf, four crossbars are needed: two longitudinal and two transverse.
2. Shelves assemble from a wooden lining.
3. Fabricate cabinet doors.
4. Based on the furniture, mark out the indentation along the width of the frame.
5. Place the dies on glue and sheathe the base of the furniture.
6. Frame each door with a plastic molding.

Important! A full-fledged and roomy closet made in this way will decorate the loggia, close all defects of the balcony slopes and will be pleasing to the eye for a long time.

to contents ↑

What can be done from the remnants of the floor: crafts

We offer you to creatively decorate your house and cottage with the remnants of parquet, making small crafts. Here are just a few ideas:

• If you have a hand-held power saw, then you can slightly reduce the thickness of the parquet and assemble the hot stands.
• Another option is small squares-cup holders.
• Tray.
• Boxes for flowers.
• Mill to decorate the interior or cottage.
• Birdhouses. An excellent refuge for birds will come from the floor. Glue PVA dies into boards of the right size, then fasten with screws in several places. Even if the glue becomes sour, then thanks to self-tapping screws, the house will not fall apart.

Original tray from parquet board

A convenient tray can be made with your own hands. If your chair or sofa has a wide armrest, then the idea is for you.

For work you will need:

• Parquet board.
• Wooden slats.
• Particleboard or MDF sheet.
• PVA construction glue.
• Crafting table.
• Tools for working with wood.

Procedure:

1. Decide on the size of the tray by measuring the armrest of the chair or the width of the bath.
2. Glue the dies together.
3. Trim the edges of the parquet.
4. Tape the sides of the canvas with wooden slats.

The tray is ready! Now you can install it on the armrest of upholstered furniture or use it in the bathroom. You can put a cup of coffee on the tray and enjoy life.

to contents ↑

What can be done from the parquet: crafts for decorating the site

An equally useful use of wood, if you need to figure out what can be done from the remnants of parquet, is fencing flower beds and decorating various areas of the garden plot. Here are just a few ideas:

• From any remnants of the laminate, even varnished, you can make an original fence-fence for beds and flower beds. Everything looks neat and stylish. Planks can be placed in the form of acute-angled arrows or a stockade. The basis of the design can be ordinary bars, to which parquet floors are attached. And the bars can be supported on metal pins or wooden stakes, driving them into the ground by 15-20 cm.
• You can also use dies to make tracks between the beds. The main advantage is that grass under the boards will not grow, which means that weeding it is not necessary.
• Garden paths can also be laid out from the old parquet or its remains. From the dies, you can lay out various drawings, geometric shapes.

Technology for creating garden paths

You can easily decorate garden paths using the remnants of parquet. Proceed as follows:

1. Align the old track cover first.
2. On both sides, install boards that will act as a box.
3. Pour the concrete mass with a layer thickness of 5-6 cm into the box.
4. Press the parquet into the hardening concrete according to the selected pattern.
5. Concrete will harden and fix in its mass wooden planks.

to contents ↑

Stock footage

As you can see, there are a lot of ways to use the remnants of any building material, the main thing is creativity and a desire to fulfill the plan.