How to clean the teapot from the stainless steel outside?

There is no doubt that every kitchen has a kettle. It does not matter which one it is - electric glass, enameled or made of stainless steel. But if your kettle is made of stainless steel, you probably wondered how to clean the kettle from the stainless steel outside? So, it is with this issue that we will help you cope quickly and without much effort.

to contents ↑

How to clean the teapot from the stainless steel outside?

Soda is a versatile cleaning agent that combines well with stainless steel. It is with this substance that you can quickly clean a metal kettle from the outside, so that there is no trace of rust, grease, lime and other impurities. Choose a method that is more convenient for you and act.

Option 1

The easiest way to clean the kettle outside is to use ordinary soda. The cleaning process will look like this:

1. Heat the kettle.
2. Put it on the table or in the sink.
3. Apply a small amount of soda to a damp sponge.
4. Wipe the surface thoroughly and carefully from the outside.
5. Upon completion of cleaning the kettle, rinse it inside and outside with warm and then cold water.

Important! It is recommended to heat the kettle, because it is thanks to the high temperature that you can quickly clean the plaque that has appeared outside. However, be extremely careful when contacting a hot kettle so that you do not get burned. We should not forget that soda is an abrasive, therefore it is necessary to act as carefully as possible, do not rub very hard so as not to scratch the surface of the kettle itself.

Option 2:

1. In a large container, draw warm water.
2. Dissolve soda from it in proportions of 1 tbsp. l on 1 liter of water.
3. Dip your kettle, made of nickel or stainless steel, in water.
4. Set to heat.
5. Boil for 30-35 minutes.
6. Allow the water to cool with the product.
7. Use a sponge to remove any residue.
8. Rinse your kettle under running water.
9. Wipe dry.

Important! In order to achieve a better effect, you can add 2-3 tsp to boiling water. dishwashing detergents.

Option 3

To speed up the process, you can use not one soda, but in combination with vinegar. To clean the kettle from the stainless steel outside, do this:

1. Pour 4 tbsp into a large container. l soda.
2. Add 4 tbsp there. l vinegar.
3. Mix everything thoroughly.
4. Place your kettle inside the container.
5. Put on a fire to boil.
6. Boil for 5-6 minutes.
7. Wait until the liquid has completely cooled.
8. Drain and clean the kettle of grease inside and out using a sponge under running water.
9. Dry with a towel.

Important! Without fail, choose exactly the container in which your kettle fits entirely. In the event that it is rather large, the amount of vinegar, as well as soda, must be increased several times. This is done so that the solution for boiling was quite enough and it was the right concentration for easy cleaning.

Option 4:

1. Take your tube of toothpaste.
2. Squeeze a small amount onto an already old toothbrush or onto the hard side of the kitchen sponge.
3. Clean the kettle thoroughly and carefully from the outside.
4. Rinse with warm and then cold running water.
5. Use a soft cloth or towel to polish your kettle to shine.

Important! In no case do not use a whitening toothpaste for cleaning, because it contains quite large abrasive elements. They can easily damage the surface of the kettle. For the same reason, do not rub your kettle very hard; the toothbrush must necessarily have relatively soft bristles. Persistent impurities are preferably pre-softened.

to contents ↑

Household chemicals for cleaning a stainless steel kettle

In the event that you are not a fierce opponent of household chemicals, special cleaners such as “Cif”, “Cillit”, “Shumanit” will carefully and efficiently help clean the kettle of grease from the outside. Use them as follows:

1. Take your chosen remedy.
2. Carefully and carefully read its instructions for use.
3. Wear rubber gloves on your hands.
4. Apply the amount of your choice on the surface of your teapot.
5. Leave for the time specified in the instructions.
6. Clean the outside of the kettle with a sponge.
7. Wash several times in cold and then warm water.
8. Wipe dry with a towel or some other dry cloth.

Important! When working with chemicals, remember that they are very toxic and can cause almost irreparable harm to your skin. Therefore, be sure to observe the necessary precautions, use gloves, and if you use “Shumanit” - also a respirator. This tool is incredibly effective and literally dissolves fat, as well as plaque, but it has a strong concentration, as well as an incredibly pungent pungent odor.

to contents ↑

How to clean the kettle from scale?

As a rule, such household appliances acquire a plaque not only outside. Electrical appliances that do not put on the stove, respectively - they are not susceptible to droplets of fat, water, etc., are more covered with a coating inside. Such a problem must be regularly fought so that the aroma and taste of your hot drinks are not distorted. In this process, there will be no difficulties and you will not have to spend a lot of time and money if you use one of the following funds.

to contents ↑

Lemon acid

The most common remedy that is used as a descaler is citric acid.

Important! A larger number of electric kettles is designed for a volume of 2.5 liters. In order to clean such a kettle, one standard bag of 25 grams of acid is enough.

Boil a solution of citric acid and water, leave it in the kettle for about 1 hour, then rinse the kettle several times.

Important! In no case do not use hard brushes and sponges - the coating will come off with a soft impact with a soft sponge or a rag. The main thing is to withstand the necessary duration of acid exposure to plaque.

Vinegar

Vinegar is perfect not only to clean the kettle from the stainless steel outside, but also from the inside. To do this, a solution of water with the addition of 9% vinegar in a ratio of 3: 1 is also boiled, after which it is left in the kettle until it cools down.

In the event that the amount of scale is large, you can repeat boiling again. The smell of vinegar will remain, therefore, upon completion of cleaning, it is necessary to boil water in the kettle several times, changing it each time.

Important! If the scum layer is incredibly thick, you can first boil water with soda in the kettle, 5 tbsp. l soda.

Non-standard methods

There are also not quite ordinary methods of getting rid of scale.

1. Potato peel. It must be boiled several times inside the kettle.
2. Cucumber pickle. This method was used by our grandmothers in the villages. The principle of application is similar to the previous tool.
3. Sprite, Coca-Cola.The specific composition of these drinks allows you to remove the entire coating when boiling them.

Important! To clean the electric kettle from the outside:

• You can wipe with a soft sponge using a dishwashing detergent.
• If the kettle is very dirty, then you can use soda as a cleaning agent.
• Electric kettles are well cleaned without the use of chemicals special sponges - melamine, which in their structure resemble an eraser.

The main thing is not to wet the surface strongly and it is advisable to prevent water from entering the electrical contacts. After removing dirt and grease, wipe the device with a microfiber cloth.

to contents ↑

Stock footage

We hope that the tips and recommendations that we have presented to you in this article will help you clean your kettle and you will always be pleased to use such household appliances, and the taste of the drinks will be stably amazing.