Silk thread brush earrings - how to do?

Beautiful and original jewelry always attracts the attention of others, but to shine at the party in new earrings, it is not necessary to buy new expensive jewelry - you can make them yourself. In this article, we will talk about jewelry such as earrings, brushes made of silk thread - how to make them, help to understand a detailed master class. Their manufacturing technique is so simple that even a beginner needlewoman, including a schoolgirl who is preparing for the holiday or thinking of giving her beloved girlfriend on March 8 or New Year, can cope with the work.

to contents ↑

Thread earrings

To make tassel earrings, you have to stock up on the following:

• Silk, lurex or synthetic threads - 2-3 skeins (the amount depends on what length of the brush you want to receive).
• Shvenzy - 2 pcs. (as the basis for future jewelry).
• Straziki or beads - 2-4 pcs (can be used as an additional decor).
• Metal caps for beads - 2 pcs. (will be used as decoration for brushes or beads).
• Cardboard.
• Scissors.
• Mouline thread.
• Glue gun.
• Strass ribbon.

To make tassel earrings that will become a wonderful decoration for an evening out, you need to proceed as follows:

• Prepare a piece of cardboard, the width of which will be equal to the length of future brushes. In our case, it is 10 cm, respectively - a cardboard strip is taken 10 cm.
• Wrap silk threads on a cardboard strip.

Important! In order to get a magnificent earring, it is advisable to make at least 200 revolutions. At this point, you can use several colors of yarn, depending on what color you want to get in the end.

• Take a floss or any other yarn thicker, from above tie the threads directly on the cardboard so that the bundle does not break up. To do this, it will be enough to make just a couple of revolutions.
• Use scissors to cut the threads from the bottom.
• Holding with your finger the place where the threads were tied on top, fold them in half already without a cardboard strip.
• Wrap the mouline thread on the brush, leaving a small piece of the brush in the form of a cylinder at the top of which is about 1-1.5 cm high. Make another couple of turns and the work on the brush can be considered completed.
• After the base of the decoration in the form of a brush is ready, you need to decorate it.

Important! If you do not want the floss to be visible, you can decorate the center with a strass ribbon, fixing it directly on top of the floss and fixing it with glue.

• Pull one of the threads of the floss up and put on the brush sequentially a cap, and then a bead (one or a couple). Then tightly tie the thread to the schwenz.
• Cut the tip of the brush with scissors so that it is as even as possible.
• In the exact same way, create a second piece of jewelry.

Beautiful and stylish designer earrings are ready! You can start trying on.

to contents ↑

Cord Earrings

To make brush earrings from a cord, you will need the following:

• Thin cord of the desired color (can be purchased at the sewing store).
• Golden thin cord.
• Accessories - earring hooks, small rings.
• Scissors.
• Clay moment is transparent.

The manufacturing sequence is as follows:

1. Cut the cord into lengths of approximately 18 cm (for one earring somewhere around 10 pieces).
2. Pass them all together into the previously prepared ring with the earring hook pre-fixed on it, bend all the threads in the center.
3. Step back from the top of 8 mm, wrap the product with a thin gold cord.
4. Fix the tip of the gold cord with glue.
5. The tips of each of the brushes trim with scissors to a uniform length.

to contents ↑

Stock footage

Making beautiful jewelry with your own hands is a very interesting and fascinating process. In addition, to make silk earrings-brushes, you don’t have to spend a lot of money and time - all materials are available and cost quite a bit. As a result, you will receive an original decoration that will be appropriate for any holiday.