The zipper on the boot is unfastened - what should I do?

A zipper is a very convenient fastener. It is very often used in the manufacture of clothing, and especially shoes. In fact, it is very convenient, but sometimes you will encounter a problem when the zipper on the boot is unzipped. What to do - we will tell in this article.

to contents ↑

Inspection

How to make a zipper on a boot? There are times in which you do not even have to resort to any method. It often happens when something is stuck in a snake. Carefully inspect the teeth - maybe a thread is stuck between them, which prevents the dog from moving.

to contents ↑

The slippery method

Zipper on the jacket jammed - what to do? If the snake sticks when you try to fasten it, it means that it is not suitable for this type of fabric. If so, just replace it.

If not, use the “slippery method”. For this:

1. Lather the clasp.
2. After that, you will notice that the dog began to walk much softer.

Important! This is a tried and tested method, time-tested, which was used by our grandparents. In fact, there is nothing easier, because a bar of soap is available in every home.

You can also use this method if the zipper on the boot fastens tightly, lather it and the dog will walk easier!

to contents ↑

Paraffin

Zipper on the boot jammed - what to do? The next option is with paraffin.

It happens that the slider starts to “slow down” at the most inopportune moment when you are in a hurry to work, for example.

The main thing is that the snake itself be made without flaws, and an ordinary paraffin candle will help you cope with the non-working dog. Just walk it a couple of times in the cloves, and the result will be visible.

This method will also help if you are interested in what to do if the lock on the jacket is stuck.

Important! Before lubricating with paraffin, be sure to clean the zipper if it is contaminated. Otherwise - you just mix paraffin with mud.

to contents ↑

Lubricants

What else can you lubricate with lightning to solve this problem. This list contains the following tools:

• Fat.
• Rosin.
• Stylus of a simple pencil.

All this works quite efficiently. Instructions for use are quite simple - you just need to surface the selected substance.

to contents ↑

Not unfastened

If the zipper cannot be unfastened in any way, then do the following:

1. Take a hammer and do not hit hard along the length of the lightning.
2. Do this from the outside and the inside.

Important! Be especially careful. Remember that it is possible to break lightning from extremely strong strokes.

to contents ↑

Tips and tricks:

• If you want to increase the life of the zipper, soak its fabric part with BF-6 glue. If you need to bring a worn clasp back to life, this method is also great.
• You need to trim the zipper a bit, but you don’t know what to do when the slider jumps off? As a limiter, you can use a regular pin.
• In order to prevent unfastening on winter shoes, you need to cut off the hook from the clothes and sew it on the side of the tongue.
• Do not rush to throw out a metal lightning if it has begun to recede a little. It can be easily sewn with a sewing machine.
• As for the zipper on a fabric basis, the dropped denticles can easily be sewn by hand with a regular needle and thread.
• For products made of thin materials, you can sew a thin zipper, but if the thing is made of dense and even rough materials, then the zipper should be appropriate.
• Be careful when ironing a product that has a plastic zipper, as too high temperatures can melt the cloves.

to contents ↑

What to do if the zipper is unfastened?

What to do if the zipper on the shoe is unfastened? If the zipper is badly fastened, then how to act, everything is extremely clear. It is enough to grease the teeth with soap or the same stylus. But what to do if you are trying in every possible way to fasten it, but it only leaves.

The cause of this problem is the open runner. Accordingly - you need to compress it. This can be done with ordinary pliers, slightly pressing the edges where it is attached. The slider itself does not need to be clamped.

Important! Be careful and do not push hard. Otherwise, he will not be able to move at all or will break.

Usually this method helps to solve this problem. If this does not happen, all that remains for you is to change it.

to contents ↑

Pants

It happens that lightning travels on trousers. This usually happens at the most inopportune moment when you are at an important meeting at work or at a meeting with a girl.

That is why it is necessary to solve this problem immediately. Having shown cunning and ingenuity, you will realize that even such an incident is solved quite simply:

• • You will need a regular paper clip or a key ring.
  • Just put it on the button and each time, fastening the pants, fasten with a fastener.

to contents ↑

Stock footage

As you can see, a broken or malfunctioning lightning is not a problem at all. If it is unfastened, then having lubricated the teeth with the necessary substance, it will come into operation. Everything is quite simple, the main thing is to know what needs to be done. We hope this article has helped you with this.