How to sew a tulle petticoat for a sun skirt?

The most important, irreplaceable, at the same time imperceptible accessory to any wedding, magnificent, children's dress is a petticoat. It has a lot of advantages, creates volume, gives shape, adds elegance, makes the image more modest, sophisticated, sophisticated. In addition, this detail is incredibly important for festive dresses in the style of fairy princesses. Short dresses with magnificent skirts look no less chic. Therefore, in this article we will consider the most popular ideas on how to sew a petticoat for a dress.

to contents ↑

How to sew a simple petticoat?

You do not need any special skills, tools, the main thing is to have patience, and you will get a wonderful underskirt under the dress. Do-it-yourself petticoat is made in just a few steps:

• Take measurements. It is necessary to determine the length of the petticoat and thigh circumference. To calculate the waist width, you need to multiply the hips by the build factor. As a rule, its value varies from 1.5 to 3.5 times. Here already decide for yourself how fluffy a skirt you want to get in the end.

Important! Please note that the stiffer the material, the lower this coefficient will be. The length of the product is measured from the waist to the desired length. The main thing is that it should be shorter than the dress.

• We transfer the measurements to the fabric. According to the standards, take a piece of rectangular material. You can use any fabric that holds its shape well. It should first be steamed so that the finished product does not settle during washing.
• Suture processing. Sew the side sections with a double seam or grind them by sewing. The upper and lower sections should be seamed with a closed section in the hem. At the top cut, be sure to leave room for threading the gum.

Important! To keep the skirt in better shape, make sure that the lower hem is wider.

• The final stage. Steam off all the seams well. Thread the gum, sew its ends into the ring with each other.

Done!

to contents ↑

How to sew a magnificent petticoat on your own?

A dress can be made magnificent only in two ways - to use rings or a large number of layers of fabric. It is generally accepted that layering is more appropriate in the case of short dresses, not too lush. Below we give two examples of tailoring petticoats - with rings, from tulle.

The use of tulle

In this section, we will look at how to sew a tulle petticoat for a sun skirt. This is the most common model of modern dresses, in particular among children. In this case, you do not need volume in the hips to make a lower skirt. The main will be a half-skirt and tulle frills.

You need to buy a lining fabric, such as silk or calico and tulle. Then do everything as follows:

• Take measurements of the waist area, measure the length of the half-skirt, taking into account the splendor of the future product and cut it out of the fabric. Handle the top.
• Leave room for the elastic, unless, of course, you have opted for a different option for a fastener, zipper or buttons.
• From tulle it is necessary to carve out the desired number of rows of frills. The uppermost tier should cover the seam securing the lowest tier a few centimeters. In this regard, the height of the frills is determined by calculating the distance between adjacent tiers.

Important! Narrow frills give splendor, but often they are very puffed under the fabric of the dress itself, wide - on the contrary, give the silhouette a roundness.

• The length of the product depends directly on the chosen splendor. The most magnificent should be the lower frill, so its length can be safely multiplied by three.
• Next, you need to sew each cutout assembly into a ring along a side cut. Bottom to process.
• To make the contraction uniform, lay a few lines along the upper cuts. Stitch tightened rings to the desired size. Bookmarks can be made without using a typewriter, and only then stitch.
• It remains only to try on the petticoat with the dress.

Important! If he is very confused, then you will have to sew a weighting agent, for example, a soft wire, making a small drawstring.

Using mesh on rings

If you are afraid that at an important event you will always get confused in a huge number of layers of a skirt, then consider another good option, how to sew a petticoat from a mesh for a fluffy skirt. The workshop below is based on the use of rings.

The technique itself is simple:

1. Cut out a skirt from the mesh of the desired splendor. Actually, the quantity and length of the rings also depend on this. As a basis, you can use all the same half-skirt, the sun or a six-link. The wedges should be equal to the fourth part of the circle.
2. The belt can be held on ties or an elastic band, or in general it is possible to sew a special secret zipper.
3. It remains only to fix the rings with a satin ribbon.
4. Turn the finished petticoat inside out. Attach a ring to the bottom. Pin the tape on top so that it completely covers it. Then stitch the ribbons over all sections.
5. Secure the remaining hoops at the same distance.
6. Now turn the product to the front side.

Important! To give it a rounded shape, sew the frills, moreover, their width should correspond to the distance between adjacent rings. As for the length, here the choice is individual.

to contents ↑

How to make a petticoat for a children's dress?

This is a great solution if your child did not find another outfit for attending a special occasion, children's performance or matinee. Kids in these outfits feel like real princesses.

First, familiarize yourself with the principles of this process:

• If you haven’t sewed such things before, then think everything over in advance so that the finished product does not clatter, does not constrain movements, and does not prick.
• Now decide on the fabric - it can be silk, lace, mesh or tulle. But it is the mesh or tulle that holds the shape best, practically does not tear and creates the ideal volume.
• The next step is to determine the volume, that is, the number of wedges.

How to make a magnificent petticoat for a children's dress? - The scheme is simple and allows you to make the product quickly enough:

1. Stitch each tulle assembly below the base of the skirt. In principle, tulle can or may not be put together.
2. Stitch evenly the base strip and the tulle frill. Sew everything on a typewriter.
3. Decide on the middle of each side and center the pieces of fabric.
4. The base must be assembled in such a way as to obtain a distance of 5-8 cm.
5. Then, assemblies are laid under the claw of the typewriter and stitched. First you need to connect all the tiers. In this case, tulle will not fly off in the process of overcasting frills.

to contents ↑

Useful Tips

Now you know exactly how to sew a petticoat for a fluffy skirt for a girl yourself, without resorting to the help of a professional seamstress. Here are a few more tips regarding:

• Color picker. This elementary rule cannot be neglected. The shade of the fabric from which you will make the petticoat should be slightly darker than the main color of the dress, otherwise your child will look ugly due to the translucent tulle lower skirt.
• The number of frills. They should be made as much as possible, since the more magnificent the product is, the more elegant the image will be.
• Hoop applications.Here everyone decides whether to use them or not.

to contents ↑

Stock footage

Actually, that's all. If desired, everyone will be able to perform such a simple job, to please themselves or their child with such a chic accessory. After all, here we have described in detail how to sew a petticoat for dresses of the most popular styles, in which it is customary to go to children's parties, attend celebrations, parties.