Dress shirt 🥝 on thin straps in a linen style

With the onset of heat, many begin to update the wardrobe. Naturally, the easiest option is to go shopping, get everything you need, as a result - leave a tidy amount of money there. Why not try to sew something yourself? You can start with something simple, so today we will learn how to sew a combination dress at home. Such a dress can be worn in hot weather, complement it with a summer look, or use it as the lower layer of clothing in the cold season.

to contents ↑

Building patterns

Everything is very clear here, the cut is very simple, there are no fasteners or draperies, which greatly simplifies the process itself. Below we will step by step look at how to sew a combination dress with lace on your own.

The ultimate, tailoring of this product begins with the design of the pattern. You can either make it completely yourself, or use the finished dress pattern and make some additional tucks on it.

We follow the scheme:

1. One and a half centimeters, raise the waist line on the back and shelf.
2. Reduce the width of the shelf and back by 1-2 cm, and in the area of ​​the armhole - by 1 cm.
3. Expand the shelf and backrest by 5 cm from the bottom, draw new sections on the sides.
4. Build new upper lines on the back and shelf.
5. Cut out the pattern in new sections, close the breast tuck and others, since they will be transferred in the side seam to the breast tuck.
6. To make the dress tightly fit the chest, reduce the new tuck by 3 cm.

to contents ↑

Determined with the material

Which material is better to choose? Naturally, satin, silk, chiffon are considered traditional for the manufacture of such things. But if you plan to wear your dress not only as underwear, then it is better to give preference to light, flowing fabric. For example, from viscose a wonderful, not hot, stylish dress-combination can turn out. Sewing from such a material will be even easier.

Important! Although this fabric is considered to be synthetic, it is made exclusively from natural raw materials. Viscose is incredibly pleasant and soft to the touch. In summer, such clothes are not hot, because they dry quickly and pass air well. Its only minus is that it is strongly wrinkled.

to contents ↑

Cutting fabrics and sewing products

The fabric will need a little less than a meter. We proceed to cutting and sewing:

• With your face inward, fold the fabric in half, lay the seams on the seamy side with the front cuts to the place where the fabric is bent. On all sections, make allowances of 1 cm. You will get two parts - a shelf and a back.
• Sweep the tucks. Using a sewing machine, sew them, iron the seams, iron all the tucks to the bottom of the dress.
• Treat the side sections with a regular seam. Fold the details inside out, sweep the back and shelf along the side cuts with the front side. Stitch and iron seams.
• Turn the product inside out, sweep the side seams. Download and iron them on a typewriter. As a result, you will get a beautifully crafted seam.
• Now process the upper section of the dress. Take a paper pattern, cut the grinder from it, or on a new sheet of paper, circle the upper lines of the product and draw a grinder so that its width is 4 cm.
• With the same allowances, cut the edge. Duplicate the liner on the non-woven, sweep it on the sides.On the machine, grind, iron the seams, overcast the bottom cut.
• Straps can be made of laces or thin strips of fabric with a width of 3 cm.
• Fold the cut strips in half lengthwise, with the help of a machine, lay a line, departing from a fold of 4 mm. Iron the seams.

Important! The remaining allowances do not need to be cut, because they will fill the cavity of the cord, which as a result will be voluminous and dense.

• Take a large needle with a thread, fasten the thread on the tip of the cord, insert the needle into the hole in the cord, pull out the threads, as if turning the cord on the front side. Strapless can do as much as you want.
• We measure the length of the strapless, try on a dress, fix them with pins, make serifs on the straps. Remove excess, sketch them on the front of the dress. Stitch on the machine, iron the seams carefully.
• Lay out the dress and trim so that you have left allowances on the side you are turning. Lay a line on it, backing 1 mm from the seam split.

Important! It is thanks to this seam that it will then be easier to tuck the grinder.

• Turn the inside out, then iron. The ends of the straps should be hidden under the edge so that they are not visible from the inside.
• It remains to process the bottom cut. Twist the edge of the dress twice on the wrong side, lay a stitch, departing from the top fold of 1 mm. Iron the seams.
• Since we are considering the option of how to sew a dress with a lace shirt, it will be logical to decorate the finished product with it. It’s easy to choose the right material, but you can attach it in the middle of the product or in any other place using a sewing machine or manually.

The dress is ready, it remains only to try on it!

to contents ↑

Stock footage

Now you are convinced that the combination can be worn not only as underwear. The finished dress will look simply gorgeous, the main thing is not to choose the material from which it is customary to sew nightgowns for its manufacture. If you are interested in how to sew a combination for a dress, then you can safely use this idea.