How to sew fur slippers with your own hands? Patterns for quick sewing

Winter at all times was famous not only for the cold weather on the street, but also for the cozy, warm atmosphere in the house. At such a time, I want to warm not only myself, but also those who are near you. So why not sew warm slippers to your household? From this article you will learn several ways of how to sew fur slippers with your own hands, patterns will help to quickly understand all the nuances, as a result - you will spend a minimum of time and money on this, pattern of chuni from a sheepskin. You will learn how to sew life-size boots, at home and sewing children's slippers.

to contents ↑

Cozy home accessory

For the upcoming work, you should stock up on some materials:

• Ready pattern - the process of its manufacture will be described below.
• Soft leather - will be used as an insole.
• Fleece.
• Fur.
• Decor elements as desired.

Important! The fur can be either artificial or natural.

In order to make a pattern, you can use two methods:

• Print the finished one, then adjust it on your foot or the foot of the person for whom the garment is made.
• Take old slippers and cut two parts along the contours - this method is much easier than the previous one.

Now you can go directly to the manufacture of the product. In order to sew slippers from fur with your own hands, to make patterns, you must follow this algorithm:

1. Take one of the parts, cut it into two equal parts.
2. Attach the resulting parts to a sheet of paper, circle them.
3. Now you need to measure the width of the flat part of the shoe’s nose, and then mark it with noticeable points, laying 40 mm from the edge. After that, measure the insole length.
4. To the obtained nozzle, glue the rectangular part, cut out the middle in it. As a result, we get a suitable pattern.
5. Cut 6 main parts according to the patterns, adding 4 cm to the allowances.
6. Sew fur and fleece parts with allowances so that the fur is inside the product. Then, then sew the fleece sole - there should be no allowance on it.
7. Insert the blank from fur into the blank from fleece, sew, leaving a place so that the product can be turned out (it is necessary that the fur is inside the slipper).
8. Sew a product, sew a leather insole.
9. Decorate slippers as you wish.

to contents ↑

Old sheepskin ugg boots

If your house has some old sheepskin coat that you are about to throw away, then do not rush to do this. You can give this seemingly unnecessary thing a new life, for example, to sew slippers from an old sheepskin coat.

For further work you will need:

• Old sheepskin coat.
• Leather for the insole.
• Ready patterns.
• Strong thick threads.
• Decor Elements.

Sewing workshop

The process of their manufacture is not as complicated as it seems at first glance:

• The first step is to build a pattern of insoles. To do this, just circle your leg or the leg of the person for whom you sew slippers.
• Transfer the resulting sketch to the cooked sheepskin coat.

Important! So that the sole does not wear out, it is recommended to make it out of durable material.

• Similarly, make the side parts of slippers.

Important! When patterning details, you need to consider the width of the ankle and the standard size of your shoes.

• Transfer the patterns to the sheepskin coat material, leaving about 1.5 cm for the seams.
• Cut out the intended blanks and start stitching them together, using the prepared strong threads.
• Decorate the finished product to your liking.

Slippers are ready!

to contents ↑

Classic slippers

After making a pattern of the sole of the shoe and its top (this time it is maximally simplified), you can proceed to make slippers from the fur yourself:

• Cut out the soles by adding 5 mm to the allowances.
• Reduce the pattern of the gasket by 7 mm along its entire contour - this is necessary to avoid thickening of the seams.
• Glue the leather soles and carefully trim all the edges.
• Glue the sole along the edges with the upper part of the slippers with the seam outward, not forgetting to combine the control marks.

Important! If the model is closed, then you need to add an extra length of the part on top of the toe. If it is open, it is necessary to adjust the length of the upper part so that the leg is firmly held in a slipper.

• Connect the top of the product and the sole.

The product is ready!

Important! The seam can be covered with a decorative leather pigtail or other decorative element that is suitable in style. So that the decoration elements are well fixed, you can use the glue gun, which is designed specifically for needlework.

to contents ↑

Stock footage

To protect your health, on warm winter evenings you need to wear warm slippers, which can be purchased at a low price in the store. However, both you and your loved ones will be much more pleasant to wear furs at home with your own hand sewn slippers.