How to build a blouse pattern?

Many girls decide to do their own clothing when they get tired of constantly shopping in search of something suitable. As you know, to please everyone is difficult, so needlewomen and get out of the situation in this way. Finding ready-made options on the Internet or in fashion magazines is not a problem, but fashionistas do not always like them, so it’s rational to make them yourself. Today we will discuss how to build a blouse pattern, which in the future can be used for sewing things of other styles. The fact is that all clothes are made according to the basic schemes that do not have any lines of a certain style.

to contents ↑

How to build a basic pattern for a small blouse?

Making a pattern of a blouse with your own hands is quite simple - the main one for building it in this case is the basic pattern of a dress with tucks. It is enough to transfer part of the chest tuck to the armhole in front, extend the shoulder line, expand the parts on the sides with the help of cuts, and deepen the armhole. The base sleeve changes according to the changes made.

If in more detail, then it is built according to this scheme:

1. First, you must copy the drawing of the base base to the waist level.
2. Then it is necessary to close the front of the chest protrusion and draw sections from the center of the chest to the middle of the shoulder and the middle of the armhole. Then it is cut to a point pointing to the center of the chest.
3. Separately, the front and back are drawn on sheets of paper so that the vertical intersects the horizontal. As a result, you get the waist and middle of the part.
4. The blank of the front part is positioned so that the vertical is connected to the midpoint, the lower one on the side line should intersect with the horizontal.
5. The detail of the back is located in the same way.
6. Then draw a shoulder line on the back of the workpiece according to the tucks.
7. Extend it in front so that it is equal in length to the level of the shoulder of the back.
8. Then lay out half a centimeter from the center point of the armhole.
9. Deepen the armhole by 2 cm on the side and draw a line from here to the side at a right angle, then postpone another 2 cm on it. This will allow you to expand the part in front.
10. Set aside 17 cm from the waist in the middle of the details, draw a bottom line from here to the middle at right angles.
11. Make an armhole.

The base of the sleeve for the base blank is constructed in this way:

• Circle the base of the sleeve with a dotted line.
• Extend the sleeve directly at the armpit level by the amount of expansion of the armhole, i.e. 2 cm on each side. From the highest point of rollback of each sleeve, lay down 1.3 cm.
• Make a rollback - its length should be 1.3 cm greater than the size of the armhole.

Important! If necessary, adjust the level of landing by okat at the longitudinal lines of the sleeve.

• Draw a horizontal line through the lower cut-off point of the sleeve.
• Set aside half the length of the armpit minus 2.5 cm.
• Draw a back and front section of the sleeve.
• Set aside 5 cm up to get the width of the cuffs.

to contents ↑

How to make a drawing for medium-sized clothes?

Blouses of this size, as a rule, do not fit tightly to the body. In this case, due to the transfer of the size of the tuck, the armhole is extended by the bulge of the chest and the increase in other parts of the pattern along the lateral sections.

Important! In this case, the expansion and deepening of the armhole is greater than in the previous version. The sleeve here changes in accordance with its increase. If you slightly extend the drawing of a blouse, then as a result you will get a blank for sewing a dress of a free cut.

This is very easy to do if you follow these instructions:

1. First, circle the base to the waist.
2. Apply a shoulder line to the back. Tucks of the bulge of the blades remain unchanged, then to leverage the shoulders due to them.
3. 0.6 cm widen the top of the back in the armhole area.
4. Transfer the tuck to the pectoral bulges in front of the armhole, thereby lengthening it.
5. Increase the front shoulder line so that it matches the length of the shoulder section of the back.
6. 3.8 cm deepen the armhole, then through the obtained points at a right angle draw a line to the middle of the front and back. Set aside 2.5 cm from the side sections.
7. At a right angle, draw a waist line towards the middle of the elements of the drawing directly through the lowest point on the sides of the back and front parts.
8. 20 cm elongate all workpiece elements in the middle of the waist.
9. Draw side slices down from the resulting points.
10. Set aside 2.5 cm inside the waist, draw a curly bottom line and model sections on the side.

to contents ↑

How to quickly create a blank for a large blouse?

How to build a pattern blouse large volume? Modeling begins with modifications to the mid-size base. The scenario for constructing the drawing is quite simple, differs little from the previous options:

• Circle the elements of the front and back according to known technology.
• Then cut it vertically from the midpoint of the shoulder to the lowest point.
• Dilute the obtained sections by the model value of the required increase. Circle the workpiece again.

Important! If you want, you can also deepen the armhole in all parts. Carefully measure its length from the front and from the back, then fold the resulting numbers and divide into two. Write down the result.

• Tighten the front and back parts down.

to contents ↑

Stock footage

If you follow the above instructions, then you can easily build any blank of the required size yourself. As with all sewing processes, the accuracy of all measurements and drawing up drawings is of great importance here.