How to clean a mink coat at home?

Unfortunately, not everyone knows the fact that the beauty of a mink coat is completely dependent on the oils that secrete fur hairs. It is they who give the product such a brilliant and radiant appearance. The fur coat absorbs dirt and dust as it wears, which act as an abrasive, as a result of which the product becomes dirty, loses its luster and becomes dull. Therefore, over time, it will become unusable. In order to prevent this from happening, we will tell you how to clean a mink coat at home.

to contents ↑

Is it possible to clean a mink coat on my own?

The simplest and most mundane solution in this case is to go to the dry cleaners. However, this option has a number of negative points:

1. This is a very expensive service.
2. There is a small chance that you can finally ruin the coat.

Therefore, in connection with these factors, many try to clean the mink coat at home. It must be produced in the following cases:

• If dust or deposits appear on the surface;
• The product has lost its natural gloss;
• Loss of pomp and bruising;
• The presence of various spots and dirt.

Important! It should always be remembered that if the product has received slight contamination, it can be eliminated using a conventional hair dryer. To do this, send a stream of air at a distance of 50-60 centimeters. If the hairs of the fur scatter freely, and after that fall into their original place, then your fur coat does not require deep cleaning. If under a stream of air fur hairs do not move, then the product needs care.

to contents ↑

What can not be done?

Before proceeding directly to the cleaning process, you should remember some points that are unacceptable in working with fur products.

Tip 1

The following manipulations are not recommended:

• Wash in the usual way;
• To undergo local washing;
• Use products that are not suitable for processing fur.

Tip 2

Dry the mink coat exclusively in a well-ventilated area. In no case should you place it over an open fire or radiator.

Important! Ironing is contraindicated for fur products. It should be remembered that the coat will get its normal appearance after cleaning after some time.

to contents ↑

We clean a mink coat at home

To begin with, it should be noted that there are two types of cleaning of fur products - dry and wet.

Dry clean

This type of care is the most acceptable and safe for fur products. He is the most sparing.

Important! In order to clean the mink coat from dirt, you just need a special brush with metal teeth. First, the product should be dried, and after that, proceed with the cleaning process.

In addition to the brush, there are several other very effective ways.

Use talcum powder

To do this, the powder must be applied to the unfolded fur coat, rub well and shake.

Important! Many very often replace talc with flour, due to the similarity of appearance. In no case should this be done, since flour swells and attracts insects under the influence of moisture. An alternative can only be baby powder.

Potato starch

This product can be found in the kitchen of every hostess. It has a destructive effect on pollution, while it does not harm the fur. You should spread the coat on a flat surface and sprinkle it with starch. With clean and dry hands, rub it on the surface of the product. After the procedure, the fur should be shaken well.

Important! If the starch turns yellow during cleaning, repeat this procedure again.

Semolina

For this method of cleaning, you need to boil 1 tablespoon of semolina in 1 cup of milk. This mixture should be cooled to a warm state, after which you need to apply it to the product, trying not to go too deep to the roots. In this condition, the product must be left for 6-7 hours. After this, remove the porridge with a comb with small teeth.

Bran

This is a fairly effective method of cleaning fur products. Its only minus is the risk of permanently ruining it. In order to prevent this from happening, the sequence of actions should be clearly observed:

• Rinse bran, put in a pan, fill with water and put on fire. They should heat up well, but in no case boil.
• Put a fur coat on a flat surface.

Important! This method is quite easily soiled, so an oilcloth should be put under the fur product.

• Flip the hot bran into a colander and wait for the water to drain.
• Avoid strong pressure, spread the hot bran on top of the product along the pile.
• Using a comb with metal teeth or a regular hair brush, you should comb the fur coat well.
• At the end of the procedure, the product must be taken out and hung on a warm balcony.

Important! You can replace bran with sawdust or coarse corn grits.

Wet cleaning

It involves exposure to a fur product using various liquid chemical compositions.

Petrol

This is one of the most popular ways. To do this, moisten the brush in refined gasoline and gently apply it to the fur, while trying not to wet it.

Important! This method is not recommended for light products, as they may turn yellow.

Hydrogen peroxide

This tool is used to clean the white mink coat at home from yellowness. You need to moisten a cotton pad with a 5% peroxide solution and treat the pile in the direction of growth.

Important! When cleaning fur in this way, you should stock up with a large number of cotton pads or napkins, since they need to be constantly changed.

Shampoo

The most important thing is that this tool does not have an eavesdropping effect.

Alcohol

To clean a mink coat from fat at home, you can use medical alcohol. You just need to moisten a cotton pad with it and sweep along the dirt along the hair growth.

Soap solution

This is a very commonplace method, but very effective. You need to dilute liquid soap in water and gently wipe the product with a cloth, and then comb the fur coat with a special comb designed to care for the fur.

How to remove organic pollution?

In order to clean the mink coat from vomiting, use the following method:

1. Apply starch to places of contamination, applying physical force, rub it well.
2. Make a solution of water and washing powder. Spray it on and around the starch patches.
3. Using a sponge, gently remove any residue.
4. After drying the product should be thoroughly combed with a brush.

Important! If the fur product is dark in color, then the washing powder must be selected without bleach.

How to clean a light mink coat at home?

Hydrogen peroxide is excellent for cleaning light fur products. In this case, you need to mix the peroxide in equal proportions with water. Pour this solution into the spray bottle and spray evenly from all sides. The fur should be wet, but not wet.Next - the coat should be dried in a natural way, and then gently comb.

Important! This is a very effective way of cleaning light fur products from various contaminants, including yellowness. Unfortunately, peroxide cannot cope with strong yellowing, so you will have to give the fur coat to dry cleaners or repaint it in a different color.

Lining cleaning

Most often, the fur coat looks great, but the lining should be cleaned.

Method 1

In order to do this qualitatively, it is necessary to tear it from the product and wash with the help of special tailor's tools.

Important! Before washing, pay attention to the temperature regime and the cycle you have chosen.

After the lining has been washed, it must be rinsed well so that there are no stains, dried and ironed, and then sewn back.

Method 2

If this method does not suit you, then the lining can be cleaned directly on the product.

Important! Cleaning the pads on the product should be done very carefully so as not to wet the skin layer.

You need to soap the inner fabric. After that, use a clean sponge to remove the soapy solution and wipe it with a dry cloth. Hang the product on a coat hanger and let it dry completely.

Important! Most often, the lower part of the lining gets dirty in winter. To avoid this, you can hem an extra piece of lining fabric with a width of 25-30 centimeters.

to contents ↑

Basic rules for the care of a mink coat

In order for your coat to always look spectacular and be cleaned as little as possible, we suggest you use a few useful tips:

• Fur products have the property of strong absorption of odors. Therefore, it should be borne in mind that if you often change the perfume, aromas will settle on the surface of the product. To get rid of such a smell will be quite problematic for you.
• Try to wear a light coat so that it does not fall on greasy products such as lipstick or foundation.
• Fur clothes for the summer period should be placed in a special lightproof cover.
• A light product is best stored in a blue case to prevent yellowing.
• In the summer, the mink coat must be aired in the fresh air.
• Moth protection should also be provided. Try to avoid aerosol products, as they can provoke contamination of the fur. Better to use special pills.

Important! One of the most popular folk remedies for moth protection is lavender flowers, peel of orange or mandarin.

to contents ↑

Stock footage

Mink fur has always been considered elite and status. He deserved such popularity because of his beauty and durability. Therefore, a mink coat is the ultimate dream of every woman. If you have already fulfilled your dream, then you should provide her with full care. In order to update a mink coat at home, You don’t need much time. The most important thing is to do it right and thoughtfully. Following the above tips and recommendations, you can clean your "wealth" of various pollution and keep it in proper form.