Do-it-yourself Philips TV repair - not turning on

Philips TV Repair"With one's own hand - a similar idea comes to a large number of people who have encountered problems in the operation of such a technique. The very idea of ​​the opportunity to save on the call of the master is very enthusiastic, while the ability to repair the equipment on your own will allow you to continue to contemplate your favorite films while relaxing in the evening, and not face the need to wait until the master finishes the repair and finally gives the result. However, is it reasonable do-it-yourself Philips TV repairif he does not turn on? This issue is quite controversial. Now we will find the answer to it.

to contents ↑

Is it worth digging into the TV stuff yourself?

On the one hand, certain measures are quite appropriate:

• If there is no image, and the TV does not turn on at all, it makes sense to make sure that it is connected to the mains and that the electricity is not turned off. Paradoxically, this advice helps a lot of people.
• If there is no sound, it is also worth checking the settings, because it may well be that the children were playing with the remote control, or you yourself accidentally turned it off.

DIY Philips TV repair it is advisable precisely in the framework of such measures, but if this approach could not help, and it really is a major and serious damage, you should not try to disassemble the thing yourself, even if you assume that you can do it. Moreover, if you do not have any skills in working with radio and TV equipment.

Important! Considering Philips TV repair circuit, in no case do not forget that interference with the structure can be quite dangerous, because the residual voltage persists even when the equipment is disconnected from the mains.

In addition, you should remember that modern TVs are high-tech and quite thin devices, so even specialists do not want to repair them at home. Breaking the TV and bringing it to a state in which it will not work again will not be difficult.

The cost of repairs in workshops is not so high as to risk an expensive device, trying to repair it yourself without proper professionalism.

Important! If you are at the stage of choosing a new brand and model of the TV, then the information described in the articles will be useful to you:

• Marches tvs.
• Best 32-inch LED TVs.

to contents ↑

If you decide to repair

In the event that the TV often blinked green LEDs during switching on, this indicates that the malfunction lies directly in the power supply. So how to produce DIY Philips TV repair:

• Place the TV on a flat and flat surface. Remove the four mounting screws from the back of your TV. The slot of the screws is an asterisk.
• Remove the two screws that secure the feet of the TV.
• Lift the back cover. In the upper right corner you will see the power supply board.
• Carefully examine the appearance of all capacitors. Top notched covers must be flat. If there is a swelling or an autopsy, then the part must be replaced.
• Buy, pick up the faulty electrolytic capacitors.

Important! Try to install analogues that exactly match the capacitance, you can use a higher voltage. And do not purchase the cheapest capacitors or suspiciously labeled parts.

• Remove the two screws from the power supply board mount. Disconnect the top and right connector. Access to details fully obtained. Solder the capacitors and install new ones.
• Assemble the TV. In no case do not forget to connect the connectors.
• Connect the TV to the network.

Important! In the market of goods a huge selection of models from different manufacturers with all kinds of characteristics is provided. We have prepared a rating of TVs of the two companies Samsung and LG - you can watch it by clicking on the link “TV rating 4k”.

to contents ↑

Stock footage

DIY TV repair Philipsif he does not turn onmay vary dramatically, depending on the cause. And to understand the accuracy of what exactly failed, often only specialists of the corresponding profile can do it.